Description
1. 123SmartBMS gen3 is a complete set for 4 cells with 2 bye directional current sensor, with Bluetooth.
2. 123SmartBMS gen3 is a highly advanced, modular BMS for lithium phosphate and Lithium Ion battery or even LTO Titanite cell in perfect condition in the house, which has long life expectancy of the battery.
3. Via the app on your phone you can use the necessary information and information to adapt.
The gen3 BMS kit consist of
1 x Beginning board
1 x End Board
2 x In-between boards
2 x Current Coils
NOTE for Victron GX systems.
I would highly recommend these extra’s
1. A Data USB cable as this can then turn off charging inc the Solar MPPT’s
2. or turn off the Inverter loads if required,
due to cell voltage needs. thus saving you the need for large cutoff relays.
This KIT is suitable for any 4 cell in series battery pack. ie a 12 Volt Battery
The Kit has 2 control relays. One for low cell voltage. One for high cell voltage all settings are fully configurable.
one current coil for loads circuit.
one current coil for charge circuit.
- When more cells are being used in series (extra between boards must be ordered).
As example (see below)
24 volt 8 cell systems the 4 extra between boards must be ordered.
48 volt 16 cell system then a extra 12 between boards must be ordered.
kit updated with 2024 updates.
Reviews
There are no reviews yet.